Parameter
Description
Set the matching threshold when authenticating via ECO mode 1:N
matching mode. The larger the value, the smaller the false accept rate
and the larger the false rejection rate
Hard Hat Detection
After enabling the hard hat detection, you can set the strategy.
Reminder of Wearing
If the person do not wear a hard hat when authenticating, the device
prompts a notification and the door will open.
Must Wear
If the person do not wear a hard hat when authenticating, the device
prompts a notification and the door keeps closed.
Face with Mask
Detection
After enabling the face with mask detection, the system will recognize
the captured face with mask picture. You can set face with mask & face
1:N level and the strategy.
Reminder of Wearing
If the person do not wear a face mask when authenticating, the
device prompts a notification and the door will open.
Must Wear
If the person do not wear a face mask when authenticating, the
device prompts a notification and the door keeps closed.
7.8 Set Access Control Parameters
You can set the access control permissions, including the functions of authentication mode, enable
NFC card, door contact, and door open time.
On the Home page, tap ACS (Access Control Settings) to enter the Access Control Settings page.
Edit the access control parameters on this page.
Face Recognition Terminal User Manual
51
