9.4.9 Configure Access Control Information
When adding a person, you can set her/his access control information, such as binding an access
control group with the person, configuring PIN code, setting the person as a visitor, a blocklist
person, or a super user, etc.
Steps
1. Enter Person module.
2. Select an organization in the organization list to add the person and click Add.
3. In the Access Control area, click to select access group(s) for the person.
Note
For details, refer to Set Access Group to Assign Access Authorization to Persons .
Figure 9-7 Configure Access Control Information
4. Set a unique PIN code for the person which can be used for access authentication.
-
Manually enter a PIN code containing 4 to 8 digits.
Note
Persons' PIN codes cannot be repeated.
-
Click Generate to randomly generate an unrepeated PIN code of 6 digits.
Note
If there are repeated PIN codes, a prompt will pop up on the client. The admin can generate a
new PIN code to replace the repeated PIN code and notify related persons.
5. Check the person's operation permissions.
Super User
If the person is set as a super user, he/she will have authorization to access all the doors/
floors and will be exempted from remaining closed restrictions, all anti-passback rules, and
first person authorization.
Face Recognition Terminal User Manual
116
