Figure 9-11 Set Output Transformation Rule
2) Select rules on the left list.
The selected rules will be added to the right list.
3) Optional: Drag the rules to change the rule order.
4) Click OK.
5) In the Custom Wiegand tab, set the rule's start bit, length, and the decimal digit.
7. Click Save.
9.7.5 Configure Person Authentication Mode
You can set the passing rules for person to the specified the access control device according to your
actual needs.
Before You Start
●
Add access control device to the client, and make sure the access control device support the
function of person authentication.
●
Add person and assign access authorization to designed person. For details, refer to Person
Management and Set Access Group to Assign Access Authorization to Persons .
Face Recognition Terminal User Manual
139
