Figure 4-2 Components 2
Note
• If the turnstile contains two lanes, standing at the entrance position, the IR boards on the left
pedestal are the IR sending boards. The IR boards on the right pedestal are the IR receiving
boards. The IR boards on the left side of the middle pedestal are the IR receiving boards, while
the IR boards on the right side of the middle pedestal are the IR sending boards.
• Warning tags can be viewed on the side panel of each pedestal.
• Safety Instructions can be viewed on the middle panel inside the pedestal.
4.2 Wiring Electric Supply
Wire electric supply with the switch in the pedestal. Terminal L and terminal N are on the switch,
while terminal PE should connect to a ground wire (yellow and green wire).
Before wiring, open the protective cover outside the switch.
DS-K3B411X Series Swing Barrier Quick Start Guide
12
