Enable Linked Audio Prompt and select the play mode.
●
If you choose TTS, you need to set language and enter the prompt content.
●
If you choose Audio File, you need to select an available audio file from the drop-down list
or click Audio File Management to add a new audio file.
Capture Linkage
Enable Capture Linkage and select the card reader to capture for the target event.
7.8.18 General Settings
Set Authentication Parameters
Click Configuration → General → Authentication Settings .
Note
The functions vary according to different models. Refers to the actual device for details.
Click Save to save the settings after the configuration.
Card Reader
Select Entrance or Exit card reader from the drop-down list.
Card Reader Type/Card Reader Description
Get card reader type and description. They are read-only.
Enable Card Reader
Enable the card reader's function.
Authentication
Select an authentication mode according to your actual needs from the drop-down list.
Recognition Interval
You can set the interval between 2 continuous recognition of a same person during the
authentication. In the configured interval, Person A can only recognized once. If another person
(Person B) has recognized during the interval, Person A can recognized again.
Note
The recognition internal value ranges from 1 to 10.
Authentication Interval
You can set the authentication interval of the same person when authenticating. The same
person can only authenticate once in the configured interval. A second authentication will be
failed.
DS-K3B961TX Series Swing Barrier User Manual
58
Summary of Contents for DS-K3B961TX Series
