background image

 

 

©  2020 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved. 
 
This Manual is the property of Hangzhou Hikvision Digital Technology Co., Ltd. or its affiliates (hereinafter referred to as 
"Hikvision"), and it cannot be reproduced, changed, translated, or distributed, partially or wholly, by any means, without 
the  prior  written  permission  of  Hikvision.  Unless  otherwise  expressly  stated  herein,  Hikvision  does  not  make  any 
warranties,  guarantees  or  representations,  express  or  implied,  regarding  to  the  Manual,  any  information  contained 
herein. 
 
About this Manual 
The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other information 
hereinafter are for description and explanation only. The information contained in the Manual is subject to change, 
without notice, due to firmware updates or other reasons. Please find the latest version of this Manual at the Hikvision 
website (https://www.hikvision.com/).   
Please use this Manual with the guidance and assistance of professionals trained in supporting the Product.   
 
Trademarks Acknowledgement 

 

  and other Hikvision’s trademarks and logos are the properties of Hikvision in various jurisdictions.   

 

Other trademarks and logos mentioned are the properties of their respective owners.   

 

                    The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks 
or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries. 
 

LEGAL DISCLAIMER 
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS 
HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND “WITH ALL FAULTS AND ERRORS”. HIKVISION 
MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY 
QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO 
EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, 
INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, 
CORRUPTION  OF  SYSTEMS,  OR  LOSS  OF  DOCUMENTATION,  WHETHER  BASED  ON  BREACH  OF  CONTRACT,  TORT 
(INCLUDING  NEGLIGENCE),  PRODUCT  LIABILITY,  OR  OTHERWISE,  IN  CONNECTION  WITH  THE  USE  OF  THE  PRODUCT, 
EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.   
YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKVISION SHALL 
NOT TAKE ANY RESPONSIBILITIES FOR  ABNORMAL OPERATION, PRIVACY LEAKAGE OR  OTHER DAMAGES RESULTING 
FROM  CYBER-ATTACK,  HACKER  ATTACK,  VIRUS  INSPECTION,  OR  OTHER  INTERNET  SECURITY  RISKS;  HOWEVER, 
HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.   
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE 
FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING 
THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF  THIRD PARTIES,  INCLUDING WITHOUT 
LIMITATION,  RIGHTS  OF  PUBLICITY,  INTELLECTUAL  PROPERTY  RIGHTS,  OR  DATA  PROTECTION  AND  OTHER  PRIVACY 
RIGHTS.  YOU  SHALL  NOT  USE  THIS  PRODUCT  FOR  ANY  PROHIBITED  END-USES,  INCLUDING  THE  DEVELOPMENT  OR 
PRODUCTION  OF  WEAPONS  OF  MASS  DESTRUCTION,  THE  DEVELOPMENT  OR  PRODUCTION  OF  CHEMICAL  OR 
BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR 
FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES. 
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS.   
 

 
 

Summary of Contents for DS-K3H44 Series



























Reviews:

Related manuals for DS-K3H44 Series