Full high turnstile • User Manual
12
Debugging instruction
1)
Check wire
：
Check whether the connection wire of the gate and the power line are properly
connected before power on.
2)
Function test
：
Access control relay time should be set to 0 seconds or 1 second
；
Rod can not push without swipe valid card
Indicator will show green and the rod of rotation can be pushed to 90 degree or 120 degree
when swipe valid card.
If passager not go through ,turnstile will lock after 5 seconds
Notice of use
If it tests well before installation, then fixed it; before you install and maintain it, please cut off
the power;
The product must be earthed, and an earth leakage breaker is necessary on the power supply;
Follow the order and pass one by one
Please keep the control button or remote control far away from the children;
Please don’t use the turnstile under the thunder and lightning condition to get rid of damage to
the equipment.
