Note
• For main door station (D series or V series), the serial No. is 0.
• For sub door station (D series or V series), the serial No. cannot be 0. Serial
No. ranges from 1 to 99.
• For each villa or building, at least one main door station (D series or V series)
should be configured, and one sub door stations (D series or V series) can be
customized.
• For one main door station (D series or V series), up to 8 sub door stations
can be configured.
Access Control and Elevator Control
Before You Start
• Make sure your door station is in the mode of main door station. Only the main
door station support elevator control function.
• Make sure your door station has been connected to the elevator controller via
RS-485 wire if you want to use RS-485 interface.
Steps
1. Click Access Control and Elevator Control to enter the corresponding
configuration page.
Video Intercom Villa Door Station User Manual
31
