1. Insert and rotate the screwdriver in the groove to disassemble the device.
2. Replace the battery.
5
Test
6
REPLACE BATTERY
Installation with Screw
1. Insert and rotate the screwdriver in the groove to disassemble the device.
2. Secure the device to the wall with two screws through the holes in the rear panel.
3. Align the front panel and the rear panel and buckle them together.
2
Trigger the emergency button, and the LED indicates the operation result.
CAUTION
RISK OF EXPLOSION IF BATTERY
IS REPLACED BY AN INCORRECT
TYPE.
REPLACEMENT OF A BATTERY
WITH AN INCORRECT TYPE THAT
CAN DEFEAT A SAFEGUARD.
CAUTION
CHEMICAL BURNING DANGER
DO NOT SWALLOW THE
BATTERY
KEEP NEW AND USED
BATTERIES AWAY FROM THE
CHILDREN.
IF YOU THINK BATTERIES MIGHT
HAVE BEEN SWALLOWED OR
PLACED INSIDE ANY PART OF
THE BODY, SEEK IMMEDIATE
MEDICAL ATTENTION.
CAUTION
DISPOSE OF USED BATTERIES
ACCORDING TO THE INSTRUC-
TIONS AND LOCAL REGULATION.
1
2
1.Button
2.Alarm Received
or
1
2
3
Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China
