ECI-B64Z2 Quick Start Guide
QSG ECI-B64Z2 041018NA
8
3.2.2
Activation via SADP Software
SADP software is used for detecting online devices, activating cameras, and resetting
passwords.
SADP can be obtained from the supplied disk or the official website, and installed by
following the prompts.
Follow the steps to activate the camera.
Steps:
1.
Run SADP to search for online devices.
2.
Check the device status from the device list, and select the inactive device.
Select inactive device.
Input and confirm
password.
SADP Interface
Figure 3-4
Note:
SADP supports batch camera activations. Refer to the SADP user manual for further details.
3. Create, input, and confirm the password.
STRONG PASSWORD RECOMMENDED
– We highly recommend creating a strong
password of your own choosing (using a minimum of eight characters, including
upper case letters, lower case letters, numbers, and special characters) in order to
increase the security of your product. We recommend regularly resetting your
password on a weekly or monthly basis, especially in high security systems.
Note:
You can enable the Hik-Connect service for the device during activation. Refer to Chapter
5.1 for detailed information.
1.
Click
Activate
to start activation.
You can check whether the activation is complete in the popup window. If activation
failed, make sure that the password meets the requirements, and try again.
Modify the IP Address
3.3
Purpose:
To view and configure the camera via LAN (Local Area Network), you need to connect the
network camera in the same subnet as your PC.