To avoid heat accumulation, good ventilation is
required for the operating environment.
Keep the camera away from liquid while in use for non-
water-proof device.
While in delivery, the camera shall be packed in its
original packing, or packing of the same texture.
Mark Description
Table 0-1 Mark Description
Mark
Description
DC Voltage
AC Voltage
1
Introduction
1.1
Product Features
The main features are as follows:
High performance CMOS sensor
IR cut filter with auto switch
OSD menu with configurable parameters
Auto white balance
Internal synchronization
SMART IR mode
3-axis adjustment
1.2
Overview
1.2.1
Overview of Type I Camera
Bracket
Sun Shield
Lens
Video Cable
Power Cord
DC 12
V
IN
Switch Button
Figure 1-1
Overview of Type I Camera
Note:
Press and hold the switch button for 5 seconds to switch
the video output. Four kinds of video outputs are
available: TVI, AHD, CVI, and CVBS.
1.2.2
Overview of Type II Camera
Camera
Enclosure
Mounting
Base
Clip Plate
Power Cord
DC12V
IN
Switch Button
Video Cable
Figure 1-2
Overview of Type II Camera
Note:
Press and hold the switch button for 5 seconds to switch
the video output. Four kinds of video outputs are
available: TVI, AHD, CVI, and CVBS.
