-
Auto: The device performs FFC automatically according to
the set schedule when switching on the camera.
-
External: Cover the lens cover, then hold
in live view to
correct the non-uniformity of display.
Figure 3-4 Flat Field Correction
3. Hold to save the settings and exit.
3.8 Correct Defective Pixel
The device can correct the defective pixels on the screen which
are not performed as expected.
Steps
1. Hold to show the menu.
2. Select .
3. press to select the offset. The offset refers to the moving
length of cursor.
4. Press or to select the moving direction.
5. Press to move the cursor to the position of dead pixel. Hold
to correct the dead pixel.
Note
If the menu blocks the dead pixel, hold
to perform mirror
display.
4 Measure the Distance
The device can detect the distance between the target and the
observation position.
Before You Start
When measuring the distance, keep the hand and the position
steady. Otherwise, the accuracy may be affected.
Steps
1. Hold to show the menu.
2. Select and press
to go to the setting interface.
1) Press or
to select the target from Deer, Wolf, Bear,
and Custom.
2) Set the target height.
7
