3EN200405 Rev. 9
33
www.liko.com
5.152
Electronic Card LR 242
Kretskort LR242
Assembly Instruction
Monteringsanvisning
Prod. No. 31290055
Contains:
Qty:
Electronic card
1
Fits:
Likorall 242/242R2R
NOTE
-
ESD protection is required.
-
With the emergency stop out, move the liftstrap all the way up against the SSP Limit switch. Check that the
motor does not operate when touching the SSP Limit switch.
- Make sure the spare part is mounted according to the assembly instruction.
- Check all functions related to the changed spare part.
-
Repairs and maintenance may only be performed by personnel authorized by Liko/Hill-Rom and using original Liko spare parts.
3 mm
2,5 mm
Tools required:
1. Remove the end covers.
2. Remove the locking screw from
the cover.
3. Remove the two locking
screws from the locking rail.
4. Remove the cover from the actuator. 5. Remove the battery and the electronic card from the clip.
Assemble in reverse order.
Likorall™
Summary of Contents for Likorall 200
Page 4: ......