2.5 Handset Pendant Malfunction
Chapter 2: Troubleshooting Procedures
Page 2 - 18
TRANS
l
LIFT
TM
Resident Stand Assist Service Manual (man173)
2
2.5
Handset Pendant Malfunction
1. The handset pendant is securely plugged into the bottom of the control box.
Yes
No
↓
→
Plug the handset pendant securely into the bottom of the control
box. If this solves the problem, go to “Final Actions” on page
2-9. If not, proceed with step 2
2. The emergency stop button is out.
Yes
No
↓
→
Turn the emergency stop button clockwise to release it. If this
solves the problem, go to “Final Actions” on page 2-9. If not,
continue with step 3.
3. Place your hand on the actuator, and press the up (
⇑)
button on the handset
pendant.
You can feel slight vibrations from the actuator and the lift arm raises.
Yes
No
↓
→
Go to RAP 2.2 and rule out a control box malfunction before
replacing the handset pendant (refer to procedure 4.16). If this
solves the problem, go to “Final Actions” on page 2-9. If not, call
Hill-Rom Technical Support at (800) 445-3720.
4. Press the down (
⇓)
button on the handset pendant.
The lift arm lowers.
Yes
No
↓
→
Replace the handset pendant (refer to procedure 4.16). If this
solves the problem, go to “Final Actions” on page 2-9. If not, call
Hill-Rom Technical Support at (80) 445-3720.
5. The problem is not a handset pendant malfunction. Return to the “Function
