4.1 Front Caster
Chapter 4: Removal, Replacement, and Adjustment Procedures
TRANS
l
LIFT
TM
Resident Stand Assist Service Manual (man173)
Page 4 - 3
4
4.1
Front Caster
Tools required:
Socket head wrench
Removal
CAUTION:
Lay a sheet or other protective cloth on the floor before turning the unit
on its back. Failure to do so could result in equipment finish damage.
1. Lay a sheet or other protective cloth on the floor. Place the unit on its back.
2. Remove the elastic stop nut (A) and carriage bolt (B) securing the front
caster (C) to the leg subassembly (D) (see figure 4-1 on page 4-3).
Figure 4-1. Front Caster
3. Remove the front caster (C) from the leg subassembly (D).
m173_010
