4.7 Base Assembly
Chapter 4: Removal, Replacement, and Adjustment Procedures
Page 4 - 14
TRANS
l
LIFT
TM
Resident Stand Assist Service Manual (man173)
4
4.7
Base Assembly
Tools required:
3/8" open end wrench
Removal
WARNING:
Lock both rear casters before beginning any service on the unit. Failure
to do so could result in personal injury.
1. Set the brakes on both rear casters.
WARNING:
Push in the emergency stop button on the control box to lock out power
and prevent inadvertant movement of the lift arm. Failure to do so could
result in personal injury.
2. Push in the emergency stop button on the control box.
3. Remove the two bolts (A) and washers (B) that secure the column (C) to
