Lubrication Requirements
Chapter 6: General Procedures
TRANS
l
LIFT
TM
Resident Stand Assist Service Manual (man173)
Page 6 - 5
6
Lubrication Requirements
WARNING:
Follow the product manufacturer’s instructions. Failure to do so could
result in personal injury or equipment damage.
CAUTION:
Do not use silicone-based lubricants. Equipment damage could occur.
Oilite bearings and bushings are utilized in several places on the system. By
retaining oil, the pores give a self-lubricating quality to the bearings and
bushings. If any silicone-based lubricant is applied to the bearings and
bushings or anywhere else on the system, this self-lubricating quality is
neutralized.
It is safe to apply the following lubricants to the system:
• P/N 8252 M-1 penetrating oil (small bottle—apply to the oilite bushings
and bearings)
• P/N SA3351 lithium grease (small tube)
