The display will show the progress of the depressuri
s
ation
until it
confirms depressuri
sed
. You can
then
disconnect
the
bottle.
8
The display will revert to the “set required pressure screen”
.
T
he compressor will
occasionally
automatically
stop and request that you
check the lubricant
levels. The
compressor will not restart until you press the control knob.
At this time you must
bleed the
moisture trap.
If connected to a
bottle without a nonreturn valve
, close the valve
on the
bottle and
bleed the EC3000 using the bleed screw at the bottom of the silver moisture
trap
.
If your
rifle or
bottle
has a non return valve you can just bleed the EC3000 as above.
If in a very humid part of the world, you will need to bleed the
moisture trap
more often.
DO NOT LEAVE THE COMPRESSOR UNATTENDED WHEN IN USE!
IN THE UNLIKELY EVENT THAT YOUR COMPRESSOR MALFUNCTIONS, DO NOT
ATTEMPT TO FIX THE PROBLEM YOURSELF. PLEASE CALL THE DISTRIBUTOR
YOU PURCHASED IT FROM.
PLEASE RETAIN THE ORIGINAL RECEIPT OF PURCHASE
The most up to date version of this instruction manual will be available at
:
www.
airriflepump
.com
Please check this website regularly
PARTS OF THIS COMPRESSOR GET VERY HOT. DO NOT TOUCH THESE HOT PARTS
DO NOT TOUCH MOVING PARTS, FOR EXAMPLE THE COOLING FAN.
KEEP FINGERS AND LOOSE CLOTHING AWAY FROM MOVING PARTS
WARNING
DANGER
WARNING
DANGER OF ELECTRIC SHOCK
DO NOT OPERATE OUTSIDE IN THE RAIN
DO NOT OPERATE WITH WET HANDS OR WET CLOTHES
DANGER
This compressor features 5000psi burst disks for backup over-pressure protection. These burst disks can be
replaced with equal or lower pressure burst disks if required but NOT with higher pressure ones. Always
ensure appropriate measures are in place to prevent over-pressurisation of vessles.
