background image

10

Guarantee and Contact Details

Designed and tested under a 
Quality System that meets Hills 
demanding quality specifications.

®

Hills Guarantee

Hills Holdings Limited undertakes 
that if any part of its manufacture has 
failed to operate correctly due to faulty 
workmanship or defective material, it will 
repair or replace the part free of cost for 
a period of TEN (10) years from date of 
purchase of the article, given fair wear 
and tear. The PVC line is also guaranteed 
for a period of ONE (1) year. Evidence of 
unfair usage or incorrect adjustment by 
the owner will void this promise.

Hills Holdings Limited will not be 
responsible for any costs in connection 
with freight or postage, or for expenditure 
necessary to dismantle the article, replace 
the part in position and re assemble  
the article.

This guarantee is in addition to any  
legal rights or remedies conferred on  
the consumer.

Hills Holdings Limited does not 
recommend the application of a ‘canopy’  
on any of their outdoor dryer range.

Unless any addition or attachment to this 
product has Hills specific approval or is 
sold as a Hills product the warranty on 
this product is waived. The product is 
designed to perform a specific task under 
established test loads and unauthorised 
attachments may produce stresses for 
which the design is not appropriate.

Designs, specifications and colours are 
subject to change without notice.

Please retain this Owner’s Manual. Record 
the following information from the carton 
for future reference.

Product Number: 

Date of purchase:

Name and location of store:

Hills Contacts

As a proudly Australian company we are 
committed to provide you with complete 
customer satisfaction. If you have questions 
about this product or find there are missing 
or damaged parts please contact your 
nearest Consumer Advice Centre during 
their local business hours.

Australia 

1300 300 564 
info@hills.com.au

New Zealand 

09 262 3052 
sales@hills.co.nz

North America 

877 534 1371 (USA, Eastern) 
gsutterlin@verizon.net

Europe 

+44 (0) 118 973 8971 (UK) 
enquiries@greenergardensolutions.co.uk

South Africa 

021 442 1540 
info@stingray.co.za

Hills Websites

www.hillsproducts.com.au 

Hills Branded Products

www.hillsholdings.com.au 

Hills Holdings Limited

Summary of Contents for Everyday Rotary 37













Reviews: