Page 16 of 37
Hills Home Hub Owner’s Manual
Modules
Note: Images are representative only. We are continually improving our products so the
actual product you purchase may look different to those pictured here.
HTM-408S Telephone Module
These are used for connecting phone lines directly to room outlets (no patching facilities).
Do not touch any components other than , , , and .
Incoming Telephone Lines
One cable supports up to 4 lines
Expansion Connector
Used to connect to another telephone
module
Mode 3 Socket
An RJ-45 socket for connecting to the
Hills Security System
Snap rivets
Used to secure the module to the
Hills Home Hub enclosure
Mode 3 Switch
If nothing connected to leave OFF
If something connected to leave ON
Attachment Legs
Used to secure the module to the
Hills Home Hub enclosure
Line Disconnect Switches
One switch for each incoming telephone
line. Switch to ON position for normal
operation. For testing, switch to OFF
position to disconnect all internal
equipment connected to .
Telephone Room Connectors
Used to connect telephone lines directly
to up to 8 wall plate outlets
Line Test Points
One RJ-45 socket for each incoming
telephone line. For testing, switch
OFF, connect a telephone to the
relevant socket and try dialing out and
receiving calls.
Connecting Phone & Data - Modules