Hills Home Hub Owner’s Manual
Page 17 of 37
HTM-408SRJ Telephone Module
These are used for connecting phone lines to room outlets via a HDM-808 Data / Patch
Panel.
Do not touch any components other than , , , , and .
Never connect a telephone socket (labelled below as
,
, or
) to a
data socket on data equipment
(
e.g.
on a HES-108 Ethernet hub
).
This can potentially damage telephone and data equipment and can be illegal
!
Incoming Telephone Lines
One cable supports up to 4 lines
Expansion Connector
Used to connect to another telephone
module
Mode 3 Socket
An RJ-45 socket for connecting to the
Hills Security System
Snap rivets
Used to secure the module to the
Hills Home Hub enclosure
Mode 3 Switch
If nothing connected to leave OFF
If something connected to leave ON
Attachment Legs
Used to secure the module to the
Hills Home Hub enclosure
Line Disconnect Switches
One switch for each incoming telephone
line. Switch to ON position for normal
operation. For testing, switch to OFF
position to disconnect all internal
equipment connected to .
Telephone Room Connectors
Used to connect telephone lines to 8
locations using Patch Cables to the
HDM-808 Module
Line Test Points
One RJ-45 socket for each incoming
telephone line. For testing, switch
OFF, connect a telephone to the
relevant socket and try dialing out and
receiving calls.
Connecting Phone & Data - Modules