Page 24 of 37
Hills Home Hub Owner’s Manual
Connecting ADSL
If you have subscribed to an ADSL service for high speed internet, you may wish to install
the modem and ADSL filter in a central location for convenience. This means that micro
ADSL filters will not be needed at each phone socket in your home.
After setting up your ADSL connection and home network, you will be able to share
equipment (e.g. share files and printers), and access high speed internet using your ADSL
connection in multiple rooms of your home.
Requirements
•
HES-108 Ethernet Hub
•
HDM-808 Data / Patch Panel
•
HTM-408SRJ Telephone Module or HTM-408S Telephone Module
•
Mode 3 ADSL Filter (must be 4 wire filter, part number S1801 recommended)
•
A terminator plug if you do not have an alarm system
•
ADSL Modem/Router
•
Accessory Plate (optional)
•
and some patch cables
Warning
Never connect a telephone socket to a data socket
(e.g. from the ADSL filter to a data
socket on your ADSL modem).
This can potentially damage your equipment and may
be illegal.
Connecting Phone & Data - Connecting ADSL