4
Installation
The Hills Portable Clothesline is quick and easy to assemble. Just follow the steps below
which are suitable for both the 17m (10 line) and 12m (8 line) models.
Note:
All diagrams in this manual show the Portable 120 model.
Step 1 – Rotate the Hinges into the open position
1.1
Place the spreader and hinge assembly on a flat surface.
1.2
Pull the latch out firmly (
Fig. 3
).
1.3
Whilst holding the latch out, rotate the hinge to the ‘open’ position
until the latch ‘clicks’ into place (
Fig. 4
).
1.4
Repeat at other end.
FD12000 - LINE ART
Pull out latch
Rotate hinge
Closed position
Fig 3
FD12000 - LINE ART
Latch
‘click’
into place
Open position
Fig 4
Pull out latch
Rotate hinge
Latch
'click'
into place
Closed position
Open position
Fig. 3
Fig. 4