5
12. To re-assemble the Upper Cross Assembly re-attach the Upper Cross Bottom to the
Secondary Standard using the two screws.
13. Place all of the Arm Stays into the pivot recesses in the Upper Cross Bottom.
14. Unlock and remove the disassembly tools from the four recesses around the cross.
15. Locate and push the Upper Cross Top into the Upper Cross Bottom until the locating
snaps have re-engaged (Fig. 9).
Note:
check all Arm Stay Pivots are engaged correctly.
16. Replace the screw into the top of the assembly.
17. Snap the Upper Cross Cover back on.
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Item 3: Replacing the Locking Collar
To service the Locking Collar you must first remove the Upper
Cross Assembly as described in Item 2.
1. Remove the screw from the Locking Collar and slide it
off the top of the Secondary Standard. (Fig. 10)
2. To re-assemble, slide on a new Locking Collar
and re-secure.
3. Re-assemble the Upper Cross Assembly.
Fig. 10
90º
Summary of Contents for Rotary 400
Page 2: ......
Page 7: ...7 Fig 11 Fig 12 Fig 13 Fig 14 Fig 15 Fig 16 Fig 17 ...
Page 15: ...15 Notes Issue November 2007 ...
Page 16: ......
