Operating the Hoist
1.
To adjust the height of your Rotary Hoist,
wind the handle and head assembly
down and then fit one or more of the
plastic spacers in the ground socket. The
suggested operating height is the user’s
head 25mm (1”) (
Fig. 4
).
Note:
The height adjusting winding
mechanism has an automatic device to
disengage the handle at the maximum and
minimum heights. A slight ‘clicking’ noise
will be heard when this system is operating.
2.
To Open:
Undo the line tie-off cord.
Make sure the lines are tangle free. Push
the lower cross and arms up until the
latch engages.
3.
To Fold:
Press the latch to release the
lower cross. Place your hands on the
arms and pull downwards.
4.
Wrap and fasten the line tie-off cord
around the hoist to prevent lines from
becoming tangled.
5.
To Remove from the ground socket:
Unlock the locking collar by rotating
anti-clockwise. Lift the Rotary Hoist from
the ground socket and store in a suitable
place. Insert the cover into the top of the
ground socket.
Fig. 4
5
Operation
Cover
Lock
Latch detail
User
head
height
+25mm
(1”)
Ground level
Locking collar
Spacers
Lower cross
Press to
release
Ground socket
