LOFT BED IN A BOX TWIN WOOD LOFT BED WITH TABLE
Assembly Instructions
Page 1 of 8
Their unparalleled strentgh is a
bi-product of the safety design.
Our bunks meet all compliance
with ASTM F 1427-07 “Standard
Consumer Safety Specifica�on for
Bunk Beds” and Code of Federal
Regula�ons (CFR) 1213 “Safety
Standards for Entrapment Hazards
in Bunk Beds” and (CFR) 1513
“Requirements for Bunk Beds”.
Safety is a coopera�ve effort
between us as the manufacturer,
and you as a guardian.
Please read
and consider the warnings listed
on this page
when choosing a
ma�ress and discussing rules of
use with your child.
SAFETY FIRST!
1. Follow the informa�on on the warnings appearing on the upper Bunk end structure and on the carton. Do not
remove warning label from bed.
2. Always use the recommended size ma�ress or ma�ress support, or both, to help prevent entrapment or falls.
3. Surface of ma�ress must be at least 5 inches (127mm) below the upper edge of guardrails.
4. Do not allow children under 6 years of age to use the upper Bunk.
5. Prohibit more than one person on the upper Bunk.
6. Periodically, check and ensure that the guardrail, ladder, and other components are in their proper posi�on,
free from damage, and that all connectors are �ght.
7. Do not allow horseplay on or under the bed and prohibit jumping on the bed.
8. Always use the ladder for entering and leaving the upper Bunk.
9. Do not use subs�tute parts. Contact the manufacturer or dealer for replacement parts.
10. Use of a nightlight may provide added safety precau�on for a child using the upper Bunk.
11. Always use guardrails on both long sides of the upper Bunk. If bunk bed will be placed next to the wall,
the guardrail that runs the full length of the bed should be placed against the wall to prevent entrapment
between the bed and wall.
12. The use of water or sleep flota�on ma�resses is prohibited.
13.
Keep these instruc�ons for future reference.
STRANGULATION HAZARD
Never a�ach or hang items to any part of the bunk bed that are not designed for use with the bed;
including, but not limited to, hooks, belts and jump ropes.
SIZE OF MATTRESS AND FOUNDATION
Use only ma�ress which is 75 inches long and 37 ½ to 38 ½ inches wide on upper Bunk.
Ensure thickness of ma�ress does not exceed 8 inches and the ma�ress is at least 5 inches below upper edge of guardrails.
!
!
SAFETY WARNINGS
All of
our
Bunk Beds were
designed and manufactured with
your child’s safety as out top
priority.
REPLACEMENT PARTS
Replacement parts, including
additional guard rails, may be
obtained from any of
our
dealers.
