S
R
D
E
F
D
E
F
S
R
CARE & MAINTENANCE:
The touch of a soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for
polishing, as they may cause damage to the finish. Periodic checks are recommended to make sure that all bolts, screws and nuts are securely tightened.
Date: 05-23-07
Page 3 of 3
K
L
K
L
R
N
N
M
R
B
B
B
B
STEP 4
Attach both Side Rails (N) to
the inside of each Full End
Panel (K) & Open End Panel
(L) from the top using 1 Allen
Bolt (B) per each outside. Also
attach the Side Rails to the
top of each rail on the Top
Support Frame (M) using 2
Allen Bolts (B) from the bottom
of each side. Tighten all bolts
from Steps 1 through 4 using
the Allen Wrenches (H & J)
that have been provided.
STEP 5
Finally, attach the Shelf (S) to the
Support Brace (R) by hooking over
the back side and securing in place
with 2 Allen Bolts (D), 2 Spring
Washers (E) & 2 Flat Washers (F)
from the back. See Figure A.
Also, attach the Shelf (S) to either
the Full End Panel (K) or the Open
End Panel (L) using 1 Allen Bolt
(C) from the inside. See Figure B.
You may attach the Shelf to either
side you prefer. The assembly of
your new item is now complete.
S
FIGURE A
FIGURE B
K or L
C
