2
2
6
6
6
6
6
6
5
5
4
4
4
4
4
4
4
3
3
3
3
3
3
3
1
1
1
Date: 11-29-2016
Page 2 of 2
Arbor Hill Mission Stool
Model #4232-822 (486891320) Non-Swivel Counter Stool
CARE & MAINTENANCE:
The tou
ch of a so
ft
c
loth is all the maintenance the finish will
ever need. Please do not use harsh or a
b
rasive cleaners f
or polishing, as they may
cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely tightened.
E
E
A
B
C
C
D
STEP 1
Begin assembly by attaching the Seat Base (B) to the Stool Back (A) by aligning the 3 center holes and securing with 3 Allen
Bolts (1), 3 Spring Washers (3) & 3 Flat Washers (4) to secure in place. Do not fully tighten bolts for this step.
STEP 2
Finish securing the Seat Base (B) to the Stool Back (A) by aligning the holes on
the legs and securing with 2 Allen Bolts (2), 2 Spring Washers (3) & 2 Flat
Washers (4) to secure in place. Tighten all bolts from Steps 1 and 2 using Allen
Wrench (7) provided.
STEP 3
Attach each Front Leg (C) to the front of the Seat Base (B) by inserting the
threads into the open holes and securing with 2 Flat Washers (4), 2 Spring
Washers (3) & 2 Hex Nuts (5) per leg. Do not fully tighten nuts for this step.
STEP 4
Attach the Front Support (D) to the inside of each Front
Leg (C) by fitting each end in place. Also attach each Side
Support (E) to the inside of each rear leg on the Stool Back
(A) and backside of each Front Leg (C) by fitting each end
in place. Secure in place using 1 Wood Screw (6) per end.
Tighten all screws. Also tighten all nuts from Step 3 using
Hex Wrench (8) provided. The assembly is now complete.
