QTY
CODE
HARDWARE
20
24
4
1
4
4
2
4
12
1
1
2
3
4
5
6
7
8
9
10
1/4” x 19mm Flat Washers
1/4” Spring Washers
1/4” x 2” Allen Bolts
1/4” Allen Wrench
1/4” x 1” Allen Bolts
1/4” x 15mm Allen Bolts
Metal Brackets
#8 x 1-1/4” Screws
1/4” x 1-1/2” Allen Bolts
1/4” x 4” Straight Allen Wrench
CARE & MAINTENANCE:
The tou
ch of a so
�
c
loth is all the maintenance the finish will
ever need. Please do not use harsh or a
b
rasive cleaners f
or polishing, as they may
cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely �ghtened.
1
1
2
2
2
2
3
3
6
STEP 1 - Figure 1
Begin assembly by aligning the notches in the Seat Frame (A) with those in Chair Back (C)
and a�ach Seat Frame (A) to Chair Back (C) by se�ng in place and aligning holes and
securing from le� and right inside back panel with 4 Allen Bolts (3), 4 Spring Washers (2)
and 4 Flat Washers (1). Do not fully �ghten bolts.
STEP 2 - Figure 2
Next secure in each rear corner of the Seat
Frame (A) and Chair Back (C) with 2 Metal
Brackets (7), 2 Spring Washers (2) and 2 Allen
Bolts (6) per side.
QTY
CODE
COMPONENTS
COMPONENTS
1
A
CODE
B
Seat Cushion
Seat Frame
1
E
Bo�om Round Stretcher
QTY
1
F
Legs
4
1
C
D
Top Round Stretcher
Chair Back
1
C
C
C
A
FIGURE 1
6
A
A
7
FIGURE 2
Page 1 of 2
Dining Stool
Wood Swivel Counter Stool
Wood Swivel Barstool
Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to insure that all components are
in proper posi�on, �ght and free from damage. Keep this assembly instruc�on for future reference.
Adult assembly is required.
