08/16/10
Page 2 of 3
L
M
N
N
K1
J
G
N
A
A
A A
A A
STEP 6
Once in place, secure the Center Support (M)
to the Support Bar (L) by fitting the metal
support in place and securing from the backside
with 1 Allen Bolt (T), 1 Spring Washer (C) & 1
Flat Washer (D). Do not fully tighten bolt. See
Figure 1 above.
STEP 7
Also secure the Center Support (M) to the
inside of the Footboard Panel (J) by fitting the
metal supports in place and securing each end
with 1 Wood Screw (E). Tighten all bolts and
screws. See Figure 2 above.
*See next page for more assembly.
E
T
C
D
Figure 1
Figure 2
MAIN ILLUSTRATION
View from
assembly side
STEP 4
Secure the Support Bar (L) to the
inside of each Side Panel (K1 & K2)
at the Headboard by fitting the metal
supports in place on each end making
sure each is secured in place. See
Figure 2 above
K2
STEP 5
Attach each Support Leg (N)
to the Center Support (M)
with 2 Allen Bolts (A) to
secure in place. See the
Main Illustration.
