OMHAC415-100
OPERATING INSTRUCTIONS
Before carrying out the following operating instructions operators should read the
SAFETY CONSIDERATIONS and CONNECTION PROCEDURE
1.
Ensure all panels are in place on the load bank.
2.
Ensure all panel mounted switches are in the OFF position.
3.
Energise the power source from the UPS or generator.
4.
Switch on the green panel mounted rocker switch.
5.
Ensure the fan rotates in the correct direction with exhaust air being expelled
from the exhaust grill.
6.
Do not exceed the maximum rating of the load bank.
7.
At the end of a test, the mains control rocker switch should be left on for
a few minutes until the resistors have cooled.
8.
Ensure the power source is isolated before opening the terminal cover or
removing the load power cables from the load bank
8
