OMHAC415-120PX
SAFETY CONSIDERATIONS
1. The unit should only be operated by competent electrical engineers who are
completely familiar with the operation and specification of the load bank.
2. The equipment is designed for AC operation only and therefore must not be
used on DC loads such as batteries.
3. Operators must ensure that interconnecting cables are correctly rated to carry
the required load current and adequately insulated to prevent the possibility of
electric shock.
4. When in use the load bank should be cordoned off using safety barriers.
5. The load bank should only be operated in an area with adequate ventilation.
6. Care should be taken as the exhaust air outlet will be hot.
7. Cables must be positioned away from the air exhaust
8. During operation the load bank should not be covered or positioned to restrict
air flow
9. Caution – some metal surfaces will be hot during operation
10.At the end of any test the fan should be kept running for 10 minutes on no load
to remove the residual heat from the load bank case.
fig 2: photo shows the front of a typical HAC-PX series load bank
4
