27
Chapter 1 Introduction
|
Hillstone
Hillstone SG-6000 E-Series Hardware Reference Guide
1.
When the device is working, press the CLR button in the pinhole and the
device will restart.
2.
After the device restarted, the CON port outputs the information of CLR
button pressed and the STA and ALM LEDs turn to constantly red. After the
LEDs turn off, the device will restart again.
Expansion Slot
The chassis height of SG-6000-E6368, SG-6000-E6360, SG-6000-E6168 and SG-
6000-E6160 is 2.5U with two half-U expansion slots (Slot 1-2) and one half-U
Bypass expansion slot.
The chassis height of SG-6000-E5960, SG-6000-E5760, SG-6000-E5660, SG-6000-
E5568, SG-6000-E5560, SG-6000-E5268, SG-6000-E5260, SG-6000-E5168 and
SG-6000-E3965 is 2U with four half-U expansion slots (Slot 1-4). The chassis
height of SG-6000-E3968, SG-6000-E3960, SG-6000-E3960-GM, SG-6000-E3668,
SG-6000-E3662, SG-6000-E3662-GM, SG-6000-E3660, SG-6000-E2868 and SG-
6000-E2860 is 1U with two half-U expansion slots (Slot 1-2).
Half-U expansion slot fits in any slot.
1U height expansion modules can only be installed in Slot2 and Slot4.
More than one expansion modules of the same type can be inserted in the
device. Only one IOC-4SFP+ or IOC-8SFP+ interface expansion module can
be inserted in Slot4 of SG-6000-E5568, SG-6000-E5560, SG-6000-E5268,
SG-6000-E5260, SG-6000-E5168 or SG-6000-E3965.
Cautions:
Cover the expansion slot with blank panel if the slot has no expansion
module installed.
For detailed information of expansion modules, see Hillstone SG-6000
M_G_E Series Expansion Modules Reference Guide.
Power Supply
Single/Dual power supply: Some product modules adopt single power supply,
while others adopt dual power supplies, i.e. there are two power inputs installed in
one device. Dual power supplies ensure uninterrupted power by instantly enabling
the standby power supply when the active power supply fails to work.
AC/DC power supply: For some product modules (as listed below), you can
choose either AC or DC power supply.
Hot-swappable: According to whether the power supply is hot-swappable or not,
the power supply is classifies into three types:
Hot-swappable power supplies are removable modules which can be
replaced at any time;
Fixed power supplies are irreplaceable and cannot be removed.
