46
Chapter 4 Boot and Configuration
|
Hillstone
Hillstone SG-6000 E-Series Hardware Reference Guide
3.
Enter the default administrator name and password “hillstone” in both the
Login and Password text boxes.
4.
Click the Login button to enter WebUI main page. Then you can set other
configurations to the device.
Tenet and SSH
You can also establish Telnet and SSH configuration environments. For more
information, please see StoneOS User Manual.
Basic Configuration
Before you begin to use the device, you should be familiar with its features and
your network deployment. Different device position in the network requires
different topology design, working mode and policy configuration.
The basic configurations may include:
1.
Create security zones, including the link layer (L2) and network layer (L3).
Bind different interfaces to correct security zones respectively.
2.
Assign IP addresses to interfaces.
3.
Configure the management functions of the interfaces and create the security
policy rules.
4.
Assign proper network addresses and configure the NAT rules as needed.
5.
Keep network connectivity by configuring routes.
6.
Configure security policy rules between security zones.
7.
Configure network parameters, such as DHCP and DNS agent, etc.
For more information, see StoneOS User Manual.
