Hillstone SG-6000 Series Firewall Appliance Installation Manual
•
Separate the protection ground of the firewall appliance from the grounding device or
lighting protection grounding device of the power supply equipment as far as possible.
•
Keep the firewall appliance far away from radio stations, radar, and other
high-frequency and high-current devices.
•
Use electromagnetic shielding when necessary.
Grounding Requirements
To ensure safer use of the firewall appliance:
•
Ensure that the grounding screw of the chassis is well grounded via the grounding
wire.
•
Ensure that the grounding pin of the power plug is well grounded.
Workbench Requirements
Before the installation, ensure your workbench is properly prepared as follows:
•
Make sure that you provide adequate space near the intake and exhaust vents of the
appliance for heat dissipation.
•
Make sure the rack is equipped with a good ventilation system.
•
Make sure the rack is strong enough to support the weight of a fully equipped
appliance.
•
Make sure the rack is well grounded.
Other Safety Recommendations
For the safe installation and operation of the firewall appliance, it is recommended to follow
these directions:
•
Keep the appliance far away from a moist area and heat sources.
•
Wear an ESD-preventive wrist strap correctly when handling the appliance.
•
Be careful with laser emission. Do not directly stare into apertures of fiber-optic
connectors that emit laser radiation.
•
Use uninterrupted power supply (UPS).
- 27 -
