17
Chapter 1 Introduction
|
Hillstone
Hillstone SG-6000 X-Series Expansion Modules Reference Guide
The following types of QSFP+ optical module are supported. The optical modules are
available with LC-type connectors and MPO-type connectors and are all hot-swappable.
Table 1-14: QSFP+ Optical Module Attributes
Attribute
Description
Short-haul
Multimode Optical
Module (850nm)
Short-haul
Multimode Optical
Module (850nm)
Ultra-long Haul
Single-mode Optical
Module (1550nm)
Connector
MPO
LC
Fiber Type
50/125μm
multimode fiber
50/125μm multi-
mode fiber
9/125μm single-mode
fiber
Maximum
Transmission
Distance
0.1km
0.3km
10km
Central
Wavelength
850nm
850nm
1310nm
Caution
: To avoid dust falling into the QSFP+ socket, you should place a rubber dust
cap (originally in the accessory box) over the QSFP+ port.
SFP+ Port
IOM- -200, IOM- and IOM-8SFP+ provide eight SFP+ ports. IOM-
P40-300 provides eight SFP+ ports. The following table describes the attributes of
SFP+ port. The SFP+ port is compatible with SFP module.
Table 1-15: SFP+ Port Attributes
Attribute
Description
Connector
SFP+
Frame Format
Ethernet_II
Ethernet_SNAP
Negotiation Mode
SFP+ optical module
10Gbps
The following types of SFP+ optical module are supported. The optical modules are
available with LC-type connectors and are all hot-swappable.