45
Chapter 4 Boot and Configuration
|
Hillstone
Hillstone SG-6000 X-Series Hardware Reference Guide
4.
Select the language you want to use.
5.
Click Login to enter WebUI main page. Then you can set other configurations to
the appliance.
Tenet and SSH
You can also establish Telnet and SSH configuration environments. For more
information, please refer to StoneOS User Manual.
Basic Configuration
Before beginning to use the device, you should be familiar with device features and
your network deployment. Different device position in the network requires different
topology design, working mode and policy configuration.
The basic configurations may include:
1.
Create security zones, including the link layer (L2) and network layer (L3). Bind
different interfaces to correct security zones respectively.
2.
Assign IP addresses to interfaces.
3.
Configure the management functions of the interfaces and create the security
policy rules.
4.
Assign proper network addresses and configure the NAT rules as needed.
5.
Configure routing of the system to ensure the network connectivity.
6.
Configure security police rules on security zones.
7.
Configure network parameters, such as DHCP and DNS agent, etc.
Note: For more information about device configuration, please refer to StoneOS User
Manual.
