Hillyard TRIDENT R26SC PRO, Use And Maintenance Manual

ENGLISH

The descriptions contained in this document are not binding. The company therefore reserves the right to make any modifications at any time to elements, details, or accessory supply, as considered necessary for 

reasons of improvement or manufacturing/commercial requirements. The reproduction, even partial, of the text and drawings contained in this document is prohibited by law. 

The company reserves the right to make any technical and/or supply modifications. The images are for reference purposes only, and are not binding in terms of design and supply.

SYMBOLS USED IN THE MANUAL

Open book symbol with an "i":

Indicates the need to consult the instruction manual.

Open book symbol:

Tells the operator to read the user manual before using the device.

Covered place symbol:

The operations preceded by this symbol must always be carried out in a dry, covered 

area.

Information symbol:

Indicates additional information for the operator, to improve the use of the device.

Warning symbol:

Carefully read the sections preceded by this symbol meticulously following the 

instructions indicated for the safety of the operator and the device.

Danger symbol (corrosive substances):

The operator should always wear protective gloves to avoid the risk of serious injury 

to the hands caused by corrosive substances.

Danger symbol (battery acid leakage):

Indicates the danger of leaking acid or acid fumes from the batteries while they are 

being recharged.

Danger symbol (moving carriages):

Indicates that the packed product should be handled with suitable carriages that 

conform to legal requirements.

Mandatory room ventilation symbol:

Informs the operator that the room must be ventilated while the batteries are being 

recharged.

Symbol indicating the compulsory use of protective gloves:

Indicates that the operator should always wear protective gloves, to avoid the risk of 

serious injury to his hands from sharp objects.

Symbol indicating the compulsory use of tools:

Informs the operator of the need to use tools not included with the machine.

Symbol indicating a treading ban:

Informs the operator that it is forbidden to tread on machine components, as this could 

lead to serious injury.

Recycling symbol:

Tells the operator to carry out the operations in compliance with environmental 

regulations in force in the place where the appliance is being used.

Disposal symbol:

Carefully read the sections marked with this symbol for disposing of the appliance.

PURPOSE AND CONTENT OF THE MANUAL

The aim of this manual is to provide customers with all the information needed to use the machine in the safest, most appropriate and most autonomous way. This includes information concerning technical aspects, 

safety, operation, downtime, maintenance, spare parts and scrapping. The operators and qualified technicians must carefully read the instructions in this manual before carrying out any operations on the machine. 

If in doubt with regard to the correct interpretation of instructions, contact your nearest HILLYARD assistance centre to obtain the necessary clarifications.

TARGET GROUP

This manual is written both for operators and for qualified machine maintenance technicians. Operators must not perform operations that should be carried out by qualified technicians. The manufacturer is not 

liable for damages resulting from failure to comply with this veto.

PRESERVATION OF THE USER

The Use and Maintenance Manual must be stored in its special pouch close to the machine, protected from liquids and anything else that could compromise its legibility.

ON CONSIGNMENT OF THE MACHINE

When the machine is consigned to the customer, an immediate check must be performed to ensure all the material mentioned in the shipping documents has been received, and also to check the machine has not 

suffered damage during transportation. If this is the case, the carrier must ascertain the extent of the damage at once, informing our customer service office. It is only by prompt action of this type that the missing 

material can be obtained, and compensation for damage successfully claimed.

INTRODUCTORY COMMENT

Any floor scrubbing machine can only work properly and effectively if used correctly and kept in full working order by performing the maintenance operations described in the attached documentation. We therefore 

suggest you read this instruction booklet carefully and read it again whenever difficulties arise while using the machine. If necessary, remember that our assistance service (organised in collaboration with our 

dealers) is always available for advice or direct intervention.

IDENTIFICATION DATA

For technical assistance or to request replacement parts, always give the model, the version and the serial number (written on the relevant plate).

TECHNICAL DESCRIPTION

The 

TRIDENT R26SC Pro 

is a floor scrubbing machine that is capable of handling a wide variety of floors and types of dirt thanks to the mechanical action of one or two brushes and the chemical action of a water-

detergent solution. As it advances, it collects the dirt removed, as well as the detergent solution not absorbed by the flooring itself. 

The machine must only be used for this purpose

.

INTENDED USE

This scrubbing machine was designed and built for the cleaning (scrubbing and drying) of smooth, compact flooring in the commercial, residential and industrial sectors by a qualified operator in proven safety 

conditions. The scrubbing machine is not suitable for cleaning rugs or carpet floors.  It is only suitable for use in closed (or at least covered) places.

ATTENTION:

 the machine is not suitable for use in the rain, or under water jets.

IT IS FORBIDDEN 

to use the machine for picking up dangerous dusts or inflammable liquids in places with an explosive atmosphere. In addition, it is not suitable as a means of transport for people or 

objects.

SAFETY

Operator cooperation is paramount for accident prevention. No accident prevention programme can be effective without the full cooperation of the person directly responsible for machine operation. The majority of 

occupational accidents that happen either in the workplace or whilst moving are caused by failure to respect the most basic safety rules. An attentive, careful operator is most effective guarantee against accidents 

and is fundamental in order to implement any prevention programme.

REGULATIONS

All references to forwards and backwards, front and rear, right and left indicated in this manual should be understood as referring to the operator in a driving position with his hands on the steering wheel.

7