DS SELECTOR (DRIVE SELECT)
The DS selector can be used to select one of the following working programs:
A. Transfer: movement of the machine without working.
B. Scrubbing only: using only the brushes in the brush head.
C. Drying: using the squeegee only.
D. Scrubbing with Drying: using both the brushes and the squeegee.
Pressing one of the symbols in the selector, you pass from the working screen (
Fig.1
) to the program
selection screen (
Fig.2
). On this screen it is possible to:
1.
Confirm the selected program.
NB
: to confirm the program, press the selected icon again.
NB
: once the selection has been confirmed, you will return to the working screen (
Fig.1
).
2. Cancel the selection and return to the working screen
NB
: to cancel the selection, press the “back” button (1) (
Fig.2
) to return to the working screen
without changing the current program.
NB
: to cancel the selection, wait 5 seconds without selecting anything and you will return to the
working screen without changing the current program.
3. Select a mode other than the one highlighted.
ECO MODE
In the centre of the DS selector there is the ECO-MODE key (1). Press it to activate the economic
function that provides the best possible performance in terms of consumption and cleaning.
NB
:
if the ECO-MODE key (1) is pressed in any working program, you will pass from ZONE
mode (
Fig.1
) to economic mode (
Fig.2
).
NB
: A grey ECO-MODE key means that economic mode is not active. A green ECO-MODE
key means that economic mode is active.
NB
: in ECO-MODE, the ZONE button is not active.
NB
: if you press key (1) in the transfer mode, you automatically pass to economic "scrubbing
with drying" mode with the program selector.
NB
:
if the ECO-MODE key (1) is pressed in any working program while eco mode is active,
you will pass from ECO-MODE (
Fig.2
) to MANUAL MODE (
Fig.3
).
MANUAL MODE
In the middle of the DS selector there is the ECO-MODE button (1). If you press the button (1) in any
eco-mode program, you will pass from ECO mode to MANUAL mode, with manual management of
the individual parameters.
NB
: A grey ECO-MODE key means that economic mode is not active. A green ECO-MODE
key means that economic mode is active.
NB
: in MANUAL MODE, the ZONE and ECO buttons are not active.
In manual mode, the visible buttons are:
2.
Detergent solution adjustment.
3. Vacuum motor performance level.
4. Pressure exerted on the central brush head.
5. Maximum forward movement speed level.
NB
: the four keys are always present, but can only be used depending on the working mode
selected. In particular:
•
Transfer: the visible button will be that of maximum speed.
•
Scrubbing without drying: the buttons visible will be those of maximum speed, detergent
solution adjustment and pressure exerted on the central brush head.
•
Drying: the buttons visible will be those of maximum speed and vacuum motor
performance level.
•
Scrubbing with Drying: the buttons visible will be those of maximum speed, detergent
solution adjustment, pressure exerted on the central brush head, and vacuum motor
performance level.
NB
: the disabled buttons and the respective indicators are grey.
NB
: every time one of the enabled keys is pressed, the relative level is cyclically increased.
Only the detergent solution adjustment can have a zero level.
ZONE PROGRAM BUTTON
The zone programs are programs saved in the machine memory. The following parameter levels:
•
Pressure exerted on the brush head
•
Forward speed
•
Adjustment of the detergent solution flow
•
Vacuum motor performance
are fixed, and have been created based on the type of environment in which you want to work.
To select one of the zone programs, proceed as follows:
1. From any screen, press the “ZONE” button (1) (
Fig.1
).
2. As soon as the button (1) is pressed, the “ZONE SELECTION” menu will be displayed (
Fig.2
).
Select one of the programs.
NB
: the name of the zone program selected is displayed in the
text indicator (3)
(
Fig.1
).
NB
: to quit the zone program:
•
From the zone program menu, select the “EXIT” key
•
Enable and then disable the ECO-MODE key.
NB
: the light blue ZONE key shows that the selected zone is active. In this case, the
ECO-MODE button is not active.
REVERSE
This machine is equipped with electronic traction control. To reverse, proceed as follows:
1. Press the “REVERSE ACTIVATION - DEACTIVATION” button (1) on the control handlebars
(
Fig.1
).
2. Press the dead man's lever (2) (
Fig.2
) to start the machine moving in reverse.
CAUTION
: reverse speed is lower than forward speed, to comply with current health and
safety standards.
NB
: to disable reverse movement, press the button (1) on the control handlebars again (
Fig.1
).
NB
: as soon as the button (1) is pressed, the buzzer will sound to indicate that reverse mode
has been activated.
NB
: if reverse gear is engaged with the squeegee in its working position, the machine will
begin moving backwards as soon as the dead man's lever is pressed, and the squeegee body
will rise to its idle position.
NB
: if reverse gear is engaged with the brush head in its working position, the machine will
begin moving backwards as soon as the dead man's lever is pressed, and the brush head
body will remain in its working position, but the solenoid valve will stop dispensing detergent
solution.
19
MANUAL
0000.00
100%
Back
0000.00
100%
A
B
D
C
1
1
2
OFFICE
0000.00
100%
ECO mode
0000.00
100%
1
1
2
MANUAL
0000.00
100%
ECO mode
0000.00
100%
1
2
MANUAL
0000.00
100%
3
MANUAL
0000.00
100%
Warehouse
Canteen
Office
Reception
Exit
SELEZIONE ZONE
0000.00
100%
1
2
1
3
2
1
1
2
2
