Technical Data
106/145
PC Cards cifX PCI, PCIe, Low Profile PCIe | Installation, Operation and Hardware Description
DOC120204UM36EN | Revision 36 | English | 2012-10 | Released | Public
© Hilscher, 2008-2012
10.1.16 CIFX 70E-RE
Item
CIFX 70E-RE
System Interface
(Bus Type)
PCI Express, One Lane Port, according to [bus spec 2; Rev. 2.0] and [bus
spec 3], (refer to section
Overview on the Pin Assignment at the Bus
,
page 95), transmission rate 2 GBit/s, 32-Bit width for the data access to the
Dual-Port Memory (DPM), or IO-DMA (Direct Memory Access)
Dual-Port Memory Size
64 KBytes
Function
Communication interface with PCI Express and Ethernet interface
Communication
Determined by the loaded firmware
Protocols
EtherCAT Master, EtherCAT Slave,
EtherNet/IP Scanner (Master),
EtherNet/IP Adapter (Slave),
Open Modbus/TCP,
Powerlink Controlled Node/Slave,
PROFINET IO Controller (Master),
PROFINET IO Device (Slave),
sercos Master, sercos Slave,
VARAN Client (Slave)
Ethernet Frame Types
Ethernet II
Processor
netX 100
LEDs
SYS, COM 0, COM 1, 2x Link, 2x Activity;
(refer also to chapter
LED Descriptions
, page 66).
Rotary Switch Slot Number
(Card ID)
To set the Slot Number (Card ID)
Configuration Software
SYCON.net (Master and Slave) or netX Configuration Tool (only Slave)
Ethernet Interface
RJ45 Socket, 10 Base-T, 100 Base-TX, potential free;
(refer also to section
Ethernet Interface
, page 86).
Transmission Rate
10/100 MBit/s, Auto-Negotiation, Auto-Cross-Over, Halfduplex/Fullduplex (100
MBit/s), depending on used firmware
Supply Voltage
+3.3 V dc ±5 %/Typ. 800 mA
Dimensions (L x W x D)
119,0 x 69,0 x 18,5 mm
Operating Temperature
0 °C ... +65 °C
Environment
The device must be used in a pollution degree 2 environment.
UL Certification
The device is UL 508 certified (UL-File No E221530).
Table 102: Technical Data CIFX 100EH-RE\CUBE
