Device Drawings
49/154
PC Cards cifX PC/104 | Installation, Operation and Hardware Description
DOC120206UM42EN | Revision 42 | English | 2014-12 | Released | Public
© Hilscher, 2008-2014
5.2 AIFX Assembly Interfaces
5.2.1
Ethernet - AIFX-RE
Only for
CIFX 104-RE\F, CIFX 104-RE-R\F.
Kanal 1 /
Channel 1
(CH 1)
Kanal 0 /
Channel 0
(CH 0)
Pi
n 1
: T
X
+
P
in 2:
T
X
-
Pin
3
: RX+
Pin
4
: Te
rm
1
Pin
5
: Te
rm
1
Pin
6
: RX-
Pin
7
: Te
rm
2
P
in 8:
T
er
m
2
LED
grün /
green
LED
gelb /
yellow
Ethernet RJ45-Buchse /
RJ45 Socket
Kabelstecker Ethernet /
Cable Connector Ethernet
(X1, 20-polig /
20 pin
)
Figure 14: Ethernet Assembly Interface (AIFX-RE)*
Note:
*Assembled device supports Auto Crossover Function. Note also: With loaded
EtherCAT Master firmware only the RJ45 channel 0 can be used, channel 1 is
deactivated. Beginning with the EtherCAT Master firmware version 3 channel 1 can be
reactivated if redundancy is activated. For Open Modbus/TCP with V2.3.4.0 and higher
both RJ 45 channels can be used.
The meaning of the
LEDs
COM0
and
COM1
at the reverse
side of the AIFX-RE and the
meaning of the green and yellow
LEDs at RJ45Ch0 and RJ45Ch1
corresponds to the description in
chapter
LED Descriptions
beginning
from page 64.
Figure 15: Front Side Ethernet Assembly Interface (AIFX-RE)
flexibles Folienkabel
flexible flat cable
Kommunikationsstatus-LED 0
(rot/grün) /
Communication Status LED 0
(red/green)
Kommunikationsstatus-LED 1
(rot/grün) /
Communication Status LED 1
(red/green)
COM0:
COM1:
COM0
COM1
Kanal 1 /
Channel 1
(CH 1)
Kanal 0 /
Channel 0
(CH 0)
Figure 16: Dimensioning and LED Display Ethernet Assembly Interface (AIFX-RE)
