Safety
14/136
2.4
Device destruction by exceeding the allowed supply voltage
Observe the following notes concerning the voltage supply:
·
The device may only be operated with the specified supply voltage of +8
V ... +36 V DC. Make sure that the limits of the allowed range for the
supply voltage are not exceeded.
·
A supply voltage above the upper limit can cause severe damage to the
device!
·
A supply voltage below the lower limit can cause malfunction of the
device.
2.5
Risk of denial of service due to extensive memory usage
close to limits
Using applications that exceed the memory resources of the device can
cause an out-of-memory situation (OOM) in the Linux kernel leading to
temporary delayed application reaction times and limited overall device
responsiveness.
You must therefore consider the memory requirements of your Docker
containers carefully before deploying them on the device. We also
recommend you to configure the logging behavior (e.g. log levels) of your
containers accordingly.
For information on the memory resources of the device, see section
2.6
Modification reserved
Changes or modifications to hardware or software of the device by the user
are not permitted.
The device does not contain any parts that are serviceable by the user.
Do not open or damage the housing.
netFIELD Compact X8M | User manual
DOC220302UM01EN | Revision 1 | English | 2022-05 | Released | Public
© Hilscher 2022
