Safety
16/63
2.5
Safety instructions to avoid personal injury
To ensure your own personal safety and to avoid personal injury, you must
read, understand and follow the safety instructions and all safety messages
in this manual about danger that might cause personal injury, before you
install and operate your netTAP device.
2.5.1
Danger of unsafe system operation
To prevent personal injury, make sure that the removal of the netTAP
device from your plant during operation will not affect the safe operation of
the plant.
2.6
Safety instructions to avoid property damage
To avoid property damage to your system or to the netTAP device, you
must read, understand and follow the safety instructions and all safety
messages in this manual about danger that might cause property damage,
before you install and operate your device.
2.6.1
Device destruction by exceeding allowed supply voltage
Observe the following notes concerning the supply voltage:
·
The netTAP device may only be operated with the specified supply
voltage. Make sure that the limits of the allowed range for the supply
voltage are not exceeded.
·
A supply voltage above the upper limit can cause severe damage to the
device!
·
A supply voltage below the lower limit can cause malfunction of the
device.
The allowed range for the supply voltage of the netTAP device is specified
in section
Technical data netTAP NT 151-CCIES-RE
2.6.2
Danger of unsafe system operation
To prevent property damage, make sure that the removal of the netTAP
device from your plant during operation will not affect safe operation of the
plant.
netTAP NT 151-CCIES-RE | CC-Link IE Field Slave to PROFINET IO-Device gateway
DOC180403UM01EN | Revision 1 | English | 2018-08 | Released | Public
© Hilscher 2018
