Using SD memory card to copy configuration data into spare netTAP devices
48/63
5. Copy configuration data from netTAP device to SD memory card.
Ø
In the
Navigation Area
, select
Configuration
>
Memory Card
Management
.
Ê
The
Memory Card Management
dialog window opens. The
Folder
field in the
Directory
area of the dialog window displays the file system
of the internal load memory of the netTAP device:
Figure 26: Memory Card Management of the netTAP DTM
Ø
Remove the write protection of your SD memory card and insert it into
the netTAP device until it engages (metal contacts of card must be
facing left).
Figure 27: Insert SD card
Ø
In order to refresh the display: close the
Memory Card Management
dialog window (e.g. by clicking on
Licensing
entry in the
Navigation
area
), then open it again.
netTAP NT 151-CCIES-RE | CC-Link IE Field Slave to PROFINET IO-Device gateway
DOC180403UM01EN | Revision 1 | English | 2018-08 | Released | Public
© Hilscher 2018
