Configuring PROFINET and defining signals
180/263
DThe column
Tag
is editable for each module. The
Tag
is an essential part
of the signal name. The following characters are allowed only:
·
Upper-case letters (A-Z),
·
lower-case letters (a-z),
·
numbers (0-9), and
·
underscore.
Do not enter two or more underscores in succession.
To open the signal configuration of the respective module, double-click any
line.
The following table lists the controls of the table
IO Items
.
Control
Description
Moves the marked IO item (module) upward by one line.
Note:
This changes the PROFINET configuration of the Edge Gateway and has to
be taken into account when configuring the PROFINET controller.
Moves the marked IO item (module) downward by one line.
Note:
This changes the PROFINET configuration of the Edge Gateway and has to
be taken into account when configuring the PROFINET controller.
Duplicates the marked IO item (module).
Note:
This changes the PROFINET configuration of the Edge Gateway and has to
be taken into account when configuring the PROFINET controller.
Deletes the marked IO item (module).
Note:
This changes the PROFINET configuration of the Edge Gateway and has to
be taken into account when configuring the PROFINET controller.
This selection allows you to filter the IO items.
·
Send/Receive shows you all IO items (modules).
·
Send shows you all send IO items (input modules).
·
Receive shows you all receive IO items (output module).
Each column offers you sort and search functions.
To open the list to select from, click the column heading. To activate the filter
function, enter the text in the filter input field and press the Enter key. You can use
* as a wildcard for filtering. To deactivate the filter function again, delete any text
entered in the filter input field and press the Enter key.
Table 55: Controls of the table “IO Items”
Edge Gateway | NIOT-E-TIB100-GB-RE (Remote)
DOC170501UM04EN | Revision 4 | English | 2018-08 | Released | Public
© Hilscher 2017 – 2018
