hilscher NIOT-E-TIB100-GB-RE User Manual Download

Page: 49 / 263

Control Panel

49/263

Recovery from internal backup

Choose this option to restore the system using the stored data, if already
an internal backup has been performed within your device.

Take care of the following consequences of system recovery:

that the former system is fully replaced and overwritten by the system
stored in the backup file.

that the system is stopped.

that a new start of the system is initiated.

that this process can last for a significant amount of time and cannot be
interrupted.

that you

must not interrupt

power supply of the Edge Gateway

any case.

In order to restore your system from a previous internal backup, proceed as
follows.

Select

System>Backup and Restore

within the Control Panel..

The following screen appears:

Figure 27: Backup and recovery

Click at

Restore from backup

Summary of Contents for NIOT-E-TIB100-GB-RE








































































































































































































































































Search results

Summary of Contents for NIOT-E-TIB100-GB-RE

Reviews:

Related manuals for NIOT-E-TIB100-GB-RE

Brands by name

Popular brands

hilscher NIOT-E-TIB100-GB-RE, User Manual

Search results

Summary of Contents for NIOT-E-TIB100-GB-RE

Reviews:

Related manuals for NIOT-E-TIB100-GB-RE

Brands by name

Popular brands