hilscher NIOT-E-TPI51-EN-RE User Manual Download

Page: 18 / 258

Commissioning the Edge Gateway

18/258

6.2

Using the web browser to establish a connection with the
Edge Gateway

You have three possibilities to access the Edge Gateway:

1. by means of the host name (see section

2. by access via the Windows network (see section

Access to the Edge

Gateway in the Windows network environment

[

}

page 19]),

3. by using the IP address (see section Using the IP address).

6.2.1

Using the host name

The Edge Gateway has a host name you can use to access the device.

Where do you find the host name on the device?

The device is delivered (factory setting) with a label printed at its bottom. In
the figure below the host name has a red frame.

Figure 6: Device label: Hostname

Establishing a connection with the host name

Enter the following address in the address line of your browser:

https://<hostname>

Example

: For the device with the host name

NTB827EB1D9D94

enter

https://

NTB827EB1D9D94

The Edge Gateway Manager opens.

You can now use the Edge Gateway manager to configure the device. For
this purpose, read section

Edge Gateway Manager web page

[

}

page 21].

Summary of Contents for NIOT-E-TPI51-EN-RE



































































































































































































































































Search results

Summary of Contents for NIOT-E-TPI51-EN-RE

Reviews:

Related manuals for NIOT-E-TPI51-EN-RE

Brands by name

Popular brands

hilscher NIOT-E-TPI51-EN-RE, User Manual

Search results

Summary of Contents for NIOT-E-TPI51-EN-RE

Reviews:

Related manuals for NIOT-E-TPI51-EN-RE

Brands by name

Popular brands