Hilti PR 3 Operating Instructions Manual Download

Page: 24 / 375

vehicle windscreen. Batteries that have reached the end

of their life must be disposed of safely and correctly to

avoid environmental pollution.

6.4 Charging the battery

DANGER

Use only the Hilti batteries and Hilti mains adapters

listed under “Accessories”.

6.4.1 Charging a new battery for the first time

Charge the battery fully before using it for the first time.

NOTE

Make sure the system to be charged is standing securely.

6.4.2 Charging a previously used battery

Ensure that the outer surfaces of the battery are clean

and dry before inserting it in the tool.

Li-ion batteries are ready for use at any time, even when

only partly charged. During charging, progress is indic-

ated by the LEDs on the tool.

6.5 Fitting the battery

DANGER

Use only the Hilti batteries and Hilti mains adapters

listed under “Accessories”.

CAUTION

Before inserting the battery in the power tool, check

to ensure that the battery terminals and the contacts

in the power tool are free from foreign objects.

1. Push the battery into the tool.

2. Turn the catch in a clockwise direction to the second

detent (the “locked” symbol is displayed).

6.6 Removing the battery

1. Turn the catch in a counterclockwise direction from

the second detent back to the “open” position (the

“unlocked” symbol is displayed).

2. Pull the battery out of the tool.

6.7 Options for charging the battery

DANGER

The PRA 85 mains adapter is for indoor use only.

Avoid ingress of moisture.

6.7.1 Charging the battery in the tool

NOTE

When charging, check that the temperature is within the

recommended charging temperature range (0 to 40°C/

32 to 104°F).

1. Swing the cover to the side so that the charging

cord socket becomes accessible.

2. Plug the charging cord from the AC adapter or motor

vehicle power adapter into the battery.

3. During charging, the charge status is indicated by

the battery status LEDs on the tool (the tool must be

switched on).

6.7.2 Charging the battery outside the tool

NOTE

When charging, check that the temperature is within the

recommended charging temperature range (0 to 40°C/

32 to 104°F).

1. Remove the battery from the tool and connect it to

the AC adapter or motor vehicle power adapter.

2. The red LED on the battery lights while charging is

in progress.

6.7.3 Charging the battery while the tool is in

operation

CAUTION

Avoid ingress of moisture.

Moisture in the interior of

the tool may cause a short circuit and chemical reactions

resulting in burns to the skin or fire.

1. Swing the cover to the side so that the charging

cord socket becomes accessible.

2. Connect the charging cord from the AC adapter to

the battery.

3. The tool continues to operate while charging is in

progress.

4. During charging, the charging status is indicated by

the LEDs on the tool.

7 Operation

7.1 Working in the horizontal plane

1. Set up the tool in a steady position suitable for the

application, e.g. on a tripod.

2. Press the on / off button.

The auto-leveling LED blinks green.

3. The laser switches on and the beam begins to rotate

as soon as the tool has leveled itself.

The green auto-leveling LED lights constantly.

7.2 Working in the vertical plane

1. When working in the vertical plane, place the tool

on its metal feet so that the control panel faces

upwards. Alternatively, the rotating laser may also be

mounted on a suitable tripod, wall bracket, facade

adapter or batter board adapter.

2. Adjust the tool so that its vertical axis is positioned

in the required direction.

Printed: 30.10.2014 | Doc-Nr: PUB / 5070202 / 000 / 02

Summary of Contents for PR 3
























































































































































































































































































































































































Search results

Summary of Contents for PR 3

Reviews:

Related manuals for PR 3

Brands by name

Popular brands

Hilti PR 3, Operating Instructions Manual

Search results

Summary of Contents for PR 3

Reviews:

Related manuals for PR 3

Brands by name

Popular brands