Hilti SF151-A Operating Instructions Manual Download

Page: 22 / 223

Battery

SFB 150

SFB 155

Energy content

31.2 Wh

46.8 Wh

Weight

0.94 kg

0.96 kg

Temperature monitoring

Yes

Type of cell

Nickel-cadmium SUB C size

Nickel-metal hydride SUB C size

No. of cells

5. Safety instructions

NOTE

The safety rules in section 5.1 contain all general
safety rules for power tools. The instructions at
5.1.2a, 5.1.2d, 5.1.2e, 5.1.3c and 5.1.4c are not
relevant to this power tool.

5.1 General safety warnings

WARNING! Read all instructions!

Failure to follow all

instructions listed below may result in electric shock,
fire and/or serious injury. The term “power tool” in
all of the warnings listed below refers to your mains-
operated (corded) power tool or battery-operated
(cordless) power tool. SAVE THESE INSTRUCTIONS.

5.1.1 Work area

Keep work area clean and well lit.

Cluttered or

dark areas invite accidents.

Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases or dust.

Power tools create sparks

which may ignite the dust or fumes.

Keep children and bystanders away while oper-
ating a power tool.

Distractions can cause you to

lose control.

5.1.2 Electrical safety

Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools.

Unmodified plugs and matching outlets will

reduce risk of electric shock.

Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators.

There is an increased risk of electric

shock if your body is earthed or grounded.

Do not expose power tools to rain or wet con-
ditions.

Water entering a power tool will increase

the risk of electric shock.

Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts.

Damaged or entangled cords

increase the risk of electric shock.

When operating a power tool outdoors, use an
extension cord suitable for outdoor use.

Use of a

cord suitable for outdoor use reduces the risk of
electric shock.

5.1.3 Personal safety

Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the influence of drugs, alcohol or medication.

moment of inattention while operating power tools
may result in serious personal injury.

Use safety equipment. Always wear eye pro-
tection.

Safety equipment such as dust mask,

non-skid safety shoes, hard hat, or hearing pro-
tection used for appropriate conditions will reduce
personal injuries.

Avoid accidental starting. Ensure the switch is
in the off-position before plugging in.

Carrying

power tools with your finger on the switch or
plugging in power tools that have the switch on
invites accidents.

Remove any adjusting key or wrench before
turning the power tool on.

A wrench or a key left

attached to a rotating part of the power tool may
result in personal injury.

Do not overreach. Keep proper footing and bal-
ance at all times.

This enables better control of