During the connection on the display appear the indication :
and sendign the USER code with tones DTMF:
C o n n e c t e d . . . .
R e m o t e O r g a n i z e r
C o n n e c t e d . . . .
security
56
6.5.1
Remote Control
During a phone connection,it’s possible to command the central unit sending the tones DTMF from
the phone pad. The activtion of the remote control can occur or during a call alarm of the central unit or
calling directly tne number of the SIM of the central unit.
To the demand of
<Insert code>
dial the USER code.
At this time or from the remote phone it’s possible to listen the guide voice with the messages
similar to those of voice menu, that is :
-
< Press 0 to disconnect > (only with central unit connected )
-
< Press 1 to STOP cycle > ,
-
< Press 2 to alarm memory >,
-
< Press 3 to exclusion zones >,
-
< Press 4 to open zones >,
-
< Press 5 to environment listening >, ( only during a remote connection )
-
< Press 6 to exit activation > (solo con INT programmata per il funzionamento a comando),
-
< Press 7 to total connection, 8 for A partial or 9 for B partial >, (only with central unit disconnected).
For the description of theese commands see the paragraph 5.3 Voice Guide vocale and following.
6.5.2
Sending messages SMS
Enabling the option <Forward SMS> (par.3.3.22) all the messages sms receivedon the SIM of the
central are sent again to the mobile inserted in the address book to the NUMBER 1 : in this way it’s
possible to control possible messages received on the SIM introduced in the central with possibles
comunications sent from the service provider.
6.5.3
Question residual credit
If you wish to question the telephone operator to know the residual credit (if planned by network
operator) it’s possible to send to the SIM of the central unit a message composed according with rules
of the same telephone operator preceded from the text <SMS> and from the telephone number of the
operator.
In this way the message received from the central is sent to the telephone operator that will
answer with a new message .
The first message received within 50 seconds, is sent again to the user who made the request.
For example for telephone operator to send an SMS with the message <SMS **** residual credit sim>
to the number of the SIM introduced in the central unit and to wait an SMS reply.
NOTE :
To consult your operator to know the modalities of request of the residual credit when
enable.
security
Use of the central unit
57
XR400GSM
- XR
800GSM - Installation guide and use
